The equipment has many functions such as rapid heating and mixing of finished asphalt mixture, regeneration of old asphalt mixture, addition of hot asphalt heating and heat insulation, etc. It can provide hot asphalt mixture for repairing asphalt pavement diseases conveniently and quickly.
1. Long-term rain makes the road damage more serious.
2. Crush the pits and grooves, put the old asphalt into the equipment and regenerate it by constant temperature heating. 3. Spray emulsified asphalt, regenerate the completed asphalt mixture, pave the pits and flatten.
4. 3-5 years after pavement repair can effectively prevent rainwater erosion.
1.Broken damaged asphalt road
2. Heating old materials, adding appropriate amount of new asphalt and hot asphalt
3. Spraying emulsified asphalt
4.Discharging and paving
5. Compacted asphalt
6. Patching complete
The equipment is specially used for repairing the cracks of asphalt pavement such as expressway, national provincial road, county and township road, urban road and airport pavement, and etc.
Get more details and quotes for products
Slotting, new material transportation, old material processing and transportation, the construction is more complicated.
Equipment heating regeneration, no need to transporte the old material, more flexible and faster.
Old materials are not recycled, which increases waste and environmental pollution.
The old materials of damaeged road are heated and recycled to complete the repair, reducing 50-80% material waste.
3-4 persons for construction.The cost of labor, new materials and transportation is higher.
1 -2 people needed for operate recycler to repair, high efficiency, saving new materials and labor costs.
Stable and reliable
Highly equipped with imported Kohler generator set, 25 horsepower twin-cylinder air-cooled Kohler gasoline engine, ensuring stable and reliable performance
dopting imported burners, the fuel consumption is only 24 liters / hour, and the hot air deflector is equipped with a spiral device to avoid the asphalt material from sticking to the hot air deflector.
Higher heating efficiency
The heating method adopts the principle of hot air and interval design, preventing open flames from directly heating the mixture,so that the heating time is fast, efficient and uniform, and will not cause the aging of the asphalt.
Equipped with emulsified asphalt spraying system, spraying hose up to 8 meters 12 volt DC air compressor to provide pressure to achieve uniform spraying effect of emulsified asphalt pressure
The new environmental protection type double dust removal device, through the design of the dust removal pipeline, the fume exhaust gas generated by the heating of the asphalt material can be cyclically heated to effectively protect the environment.
Temperature controller system
Imported temperature controller system, real-time display and control of thermal oil temperature, asphalt temperature, and asphalt material temperature inside the drum
DEVICE PARAMETERS>>For detailed parameters and quotes<<
|It can quickly repair asphalt road problems such as pot holes|
|Product number||HOTBOX-S800-II Asphalt Recycling Hotbox(Vehicular)|
|First heating time||15-20min|
|Temperature control range||0-300 ℃|
|Temperature monitoring device||Omron (omorn) temperature controller|
|Roller heating method||Diesel burner → hot air circulation heating|
|Burner diesel tank volume||80 L|
|Dust removal device||Cyclone smoke filter|
|Asphalt heating insulation volume||100L|
|way to heat up||Electric heating|
|Heating temperature||170-190 ℃|
|Asphalt transportation||Built-in pumping|
|Asphalt pump flow||25kg / min|
|Asphalt quantitative pumping control||Time relay control|
|Used for old material regeneration, cold material heating and new material mixing.|
|1. High work efficiency. Diesel heating by 360 degree rotating, it only takes 12-18 minutes to heat a full bin.|
|2. Integrated intelligent control. When heating, it can prevent the asphalt mixture from coking by the combination of time relay|
and temperature controller
|3. 100% recycling of old material, it can save cost and material to the maximum.|
|4. Automatic discharging control device. Heating and mixing by the melter forward rotating, and discharging by reversing.|
|5. It has system of hot asphalt and emulsified asphalt.|
A1, Building 3, No.6 Jingye Road, Torch Development Zone, Zhongshan City, Guangdong Province, China
TEL : +86-760-8870 8760 +86-760-8887 2700
FAX : + 86-760-8887 2711
E-mail : firstname.lastname@example.org
International Sales Division:
Contact : Nicole Lin WeChat ID：139 249 66667
MOB : +86-139 249 66667
Email : email@example.com